OPT-Professional Machine Vision Lighting Provider

Product search:
Your current location: Home > Products > Controller
Analog Current Controller For Spot Light

Catalog Download

APA0705F.pdf

Demo & SDK

OPT Controller Demo & SDK V3.3.zip

Selection Guide

Model

Channels

Compatible Light

OPT-APA0705F-1

1

0.7A/5V LED light

OPT-APA0705F-2

2

0.7A/5V LED light

OPT-APA0705F-3

3

0.7A/5V LED light

OPT-APA0705F-4

4

0.7A/5V LED light

Product Features

1. Manual stepless intensity control

2. Trigger signal input: connect an external signal source (e.g. a cameratrigger signal) for synchronized strobing of the illumination device

3. Easy to install: screw and DIN rail mounting available

Device Overview

No

Item

Description

1

Adjustment key

One key per channel; Rotate it in clockwise, the intensity increase; 

rotate it anti-clockwise, the intensity decrease

2

TS work mode switch

To switch between "ON" and "OFF" trigger mode

3

AC power input

100 - 240 V AC, 50/60 Hz

4

Ground

Ground protection

5

Trigger connector

For connection with an external trigger source

6

Light connector

For 0.7A/5V LED light

7

Power

To turn the controller on/off

Remark: Above data is for APA0705F-4. For APA0705F-1/2/3, the quantity of intensity adjustment keys, external trigger connectors and light 

connectors are 1, 2,3 respectively.

Parameters

Item

Parameter

Description

Input voltage

AC100~240V

50/60Hz

Output current

0~0.7A

Continuous adjustment

Lighting mode

Continuous ON / Strobe


Intensity control

Stepless

Via intensity adjustment key

External trigger

Synchronized strobe with

external trigger signal


Trigger way

Switching value (ON / OFF)


Trigger delay time

≤80μs


External trigger frequency

Max 1 kHz


ON/OFF mode switching

Support

Via the TS switch to

change the mode between

ON and OFF

Output power

3.5W/CH


Standby power consumption

APA0705F-1: <3.5W

input 220V AC

APA0705F-2: <3.6W

APA0705F-3: <4.0W

APA0705F-4: <4.5W

Hi-Pot test

AC1500V 1min

Leak current <10mA

Insulation resistance

DC500V

>20MΩ

Working temp.

-5℃~50℃


Size (L x W x H)

73.5 x 129.5 x 166mm


Weight (kg)

APA0705F-1/2:  0.7


APA0705F-3/4:  0.7


Trigger Connector

APA0705F-1/2/3/4 has 1, 2, 3, or 4 channels. 

Each channel has two pins as input:“+” and “-”. Below drawing is the trigger connector of APA0705F-4 .



Work Mode Set

Analog controller has ON and OFF two work modes, can switch via TS work mode switch. Please refer to the table below for details:

TS Switch

Work Mode

Description

Up

ON

TRIG+ and TRIG- disconnected, the light is on;

TRIG+ and TRIG- connected, the light is off

Down

OFF

TRIG+ and TRIG- disconnected, the light off;

TRIG+ and TRIG- connected, the light is on.

Dimensional Drawing [mm]